BRP can-am RENEGADE 500 2015 Operator's Manual page 121

vmo2012-014-012_a
1. Rear brake fluid reservoir
Adding Brake FLuid
Clean filler cap.
WARNING
Clean filler cap before removing.
Remove screws retaining the reservoir
cap.
Remove reservoir cap.
Add fluid as required using a clean fun-
nel. Do not overfill.
NOTICE
Brake fluid can damage
plastic and painted surface. Wipe
off and clean any spillage.
Reinstall reservoir cap and tighten
screws.
NOTE: Ensure filler cap diaphragm is
pushed inside the cap before closing
the brake fluid reservoir.
Recommended Brake Fluid
Always use brake fluid meeting the
specification DOT 4 only.
WARNING
To avoid damage to the braking
system, do not use other brake
fluid types.
Brake Inspection
CAUTION The brakes can be
very hot after prolonged use of the
vehicle and can cause burns. Wait
for the brakes to cool down.
The brake inspection, maintenance
and repair should be performed by an
authorized Can-Am dealer.
However, verify the following between
visits to your dealer:
– Brake fluid level
– Brake system for fluid leaks
– Brake cleanliness.
The brake fluid replacement or
brake system maintenance and
repairs should be performed by an
authorized Can-Am dealer.
______________
MAINTENANCE PROCEDURES
WARNING
119