What to Do Before Starting the Engine (Key ON)
ITEMS TO BE
INSPECTED
Multifunction gauge
Lights
What to Do After the Engine is Started
ITEMS TO BE
INSPECTED
Steering
Shift lever
2WD/4WD selector
Brakes
Emergency engine
stop switch
Ignition switch
________
INSPECTION TO PERFORM
Check operation of indicator lamps in multifunction gauge
(during first few seconds of key ON)
Check for messages on multifunction gauge
Check operation and cleanliness of headlights and taillight
Check operation of low and high beams
Check operation of brake light
INSPECTION TO PERFORM
Check if steering operates freely by completely turning it
from side to side
Check operation of shift lever (P, R, N, H and L)
Check operation of 2WD/4WD selector
Drive forward slowly a few feet and apply brake lever
and brake pedal individually. The brakes must fully apply.
Lever and pedal must fully return when released
Check that the emergency engine stop switch is working
properly
Check if ignition switch is working properly by restarting
and stopping the engine
SAFETY INFORMATION
PRE-RIDE INSPECTION
________
✔
✔
43