BRP can-am RENEGADE 500 2015 Operator's Manual page 71

vmo2012-012-007_a
TYPICAL
1. Selector
2. 2WD position
3. 4WD position
This switch selects 2 wheel drive or 4
wheel drive mode when the vehicle is
stopped and the engine is running.
NOTICE
The
stopped to engage or disengage
2WD/4WD switch. Mechanical dam-
age may occur if switch is engaged
or disengaged while driving.
The 4WD mode is engaged when the
switch is pushed downwards.
V07I0DY
TYPICAL - 4WD MODE
vehicle must
The 2WD mode is engaged when the
switch is pushed upwards. The vehicle
is then rear wheel drive only.
be
V07I0EY
TYPICAL - 2WD MODE
_______________
CONTROLS
69