BRP can-am RENEGADE 500 2015 Operator's Manual page 69

vmo2012-014-021_a
TYPICAL — MULTIFUNCTION SWITCH
1. Low/high beam headlight switch
2. Emergency engine stop switch
3. Engine start button
4. Override/DPS button (if applicable)
Low/High Headlight Switch
This switch is used to select either the
headlights low or high beams.
vmo2012-005-003_a
1. Low/high beam headlight switch
2. Low beam
3. High beam
Emergency Engine Stop Switch
vmo2012-014-021_b
TYPICAL
1. Emergency engine stop switch
This switch can be used to stop the en-
gine and as an emergency control.
To stop engine, set the emergency en-
gine stop switch to the STOP position.
NOTE: While the engine can be
stopped by turning the ignition key to
OFF position, we recommend the en-
gine be stopped by setting the emer-
gency engine stop switch to the STOP
position.
Engine Start Button
vmo2012-014-021_c
TYPICAL
1. Engine start button
When engine start button is pressed
and held, it starts the engine.
_______________
CONTROLS
67