Intended Use - Beckhoff AG3210 Operating Instructions Manual

Product overview

Intended use

3.5
Improper use
3.5.1
20 ───
The planetary gear units from the AG3210 series may be operated
exclusively for the activities foreseen and defined in this documenta-
tion, taking into account the prescribed environmental conditions.
The components are to be installed in electrical systems or ma-
chines and only put into operation as integrated components of the
system or machine.
The thermal protection contact incorporated in the motor windings
must be analyzed and monitored on a regular basis.
The gear unit is intended for attachment to motors under the follow-
ing conditions:
• motors of the design B5
• At least a concentricity tolerance or axial run-out tolerance ac-
cording to EN 50347
• A cylindrical shaft end with the tolerance class h6 to k6
Read the entire drive system documentation:
• This translation of the original instructions
• Original operating instructions for the motors
• Complete machine documentation provided by the machine
manufacturer
Any use exceeding the permissible values specified in the Technical
data is considered improper and therefore prohibited.
The planetary gear units from the AG3210 series are not suitable for
use in the following areas:
• ATEX zones without suitable housing
• Areas with aggressive environments, for example aggressive
gases or chemicals
AG3210 Version: 2.2