Beckhoff AG2300 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Beckhoff Manuals
  4. Engine
  5. AG2300
  6. Operating instructions manual

Beckhoff AG2300 Operating Instructions Manual

Highend planetary gear unit
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Operating instructions | EN
AG2300
Highend planetary gear unit
8/28/2020 | Version 2.0

Advertisement

Table of Contents
loading

Related Manuals for Beckhoff AG2300

Summary of Contents for Beckhoff AG2300

  • Page 1 Operating instructions | EN AG2300 Highend planetary gear unit 8/28/2020 | Version 2.0...

  • Page 3: Table Of Contents

    Scope of the documentation .......................... 7 Staff qualification...............................  8 Safety and instruction .............................  10 Explanation of symbols ...........................  10 Beckhoff Services ............................ 12 For your safety.............................. 13 General safety instructions .......................... 13 Product overview...............................  15 Standard gear unit ............................ 15 Name plate..............................
  • Page 4 Maintenance and cleaning .......................... 78 Cleaning agents ..............................  78 Intervals ................................ 80 Fault correction.............................. 81 Decommissioning..............................  82 Disassembly.............................. 82 Disposal ................................ 83 Guidelines and Standards .......................... 84 EU conformity .............................. 84 RoHS ................................ 84 Index ...................................  85 ─── AG2300 Version: 2.0...

  • Page 5: Notes Of The Documentation

    Notes of the documentation Disclaimer Beckhoff products are subject to continuous further development. We reserve the right to revise the operating instructions at any time and without prior announcement. No claims for the modification of products that have already been supplied may be made on the basis of the data, diagrams and descriptions in these operating instruc- tions.
  • Page 6 • Use of untrained personnel • Use of unauthorized spare parts Copyright © Beckhoff Automation GmbH & Co. KG, Germany 1.1.4 The copying, distribution and utilization of this document as well as the communication of its contents to others without express autho- rization is prohibited.

  • Page 7: Version Numbers

    Product features Only the product properties specified in the current operating in- structions are valid. Further information given on the product pages of the Beckhoff homepage, in emails or in other publications is not authoritative. Scope of the documen- Apart from these operating instructions, the following documents are...

  • Page 8: Staff Qualification

    Trained specialists have received specific technical training and have specific technical knowledge and experience. Trained special- ists can: • apply relevant standards and directives • assess tasks that they have been assigned • recognize possible hazards • prepare and set up workplaces ─── AG2300 Version: 2.0...
  • Page 9 • assess the work environment • independently optimize and carry out their work Customer service Customer service personnel and service personnel are verifiably trained and authorized by Beckhoff or the machine manufacturer for the work on the machine or plant. Version: 2.0 AG2300...

  • Page 10: Safety And Instruction

    1.6.1 DANGER Failure to observe will result in serious or fatal injuries. WARNING Failure to observe may result in serious or fatal injuries. CAUTION Failure to observe may result in minor or moderate injuries. ─── AG2300 Version: 2.0...
  • Page 11 In the case of documentation on a monitor screen, use the zoom function to enlarge the QR code and reduce the distance. Version: 2.0 AG2300 ───...

  • Page 12: Beckhoff Services

    Beckhoff and the worldwide partner companies offer comprehensive support and service. Support The Beckhoff Support offers technical advice on the use of individ- ual Beckhoff products and system planning. Staff provide assistance 1.7.1 for programming and commissioning complex automation systems and offer a comprehensive training program.

  • Page 13: For Your Safety

    Touch electrical components or assemblies only when wearing ESD protective clothing. Move only on a conductive floor. Only use original packaging for further processing When shipping, transporting, storing and packing, use the original packaging or conductive materials. Version: 2.0 AG2300 ───...
  • Page 14 See chapter: Decommissioning No direct skin contact with solvents or lubricants In case of improper use, the solvents or lubricants used can lead to skin irritations. Therefore, avoid direct skin contact. ─── AG2300 Version: 2.0...

  • Page 15: Product Overview

    Screw plug, mounting hole Adapter plate Holes for the motor attachment Feather key [+] Output shaft with center bore Holes for the motor attachment Clamping bolt Holes for the attachment of the gear unit Clamping hub Version: 2.0 AG2300 ───...

  • Page 16: Name Plate

    Product overview Name plate Number Explanation Serial number Lubrication Gear unit type Date of manufacture Ratio Combined motor Data Matrix Code with Beckhoff BTN Country of manufacture ─── AG2300 Version: 2.0...

  • Page 17: Type Key

    Product overview Type key AG2300-+SP075S-MF1-3-1C1-AM803x Explanation AG2300 Gear unit series AG2300 = planetary gear unit SP Gear type SP = standard Size Lubrication S = Standard Gear unit variant M = Motor-mounted gear unit Gear unit version F = Standard C = high-speed No.

  • Page 18: Product Characteristics

    The bearing of the output shaft is designed for high breakdown torques and high axial forces. Maintenance-free ball bearings The gear units are of a high quality standard due to manufacturing according to ISO 9001. The ball bearings are lifetime-lubricated and maintenance-free. ─── AG2300 Version: 2.0...

  • Page 19: Ordering Options

    Order options are defined by the type key and must be ordered sep- arately. The listed components cannot be retrofitted. High-speed version In addition to the standard MF version, the AG2300 planetary gear unit is available as a high-speed version. This version is specially 3.5.1 designed for applications with high speeds in continuous operation and has the type key "MC".

  • Page 20: Intended Use

    Any type of use that exceeds the permissible values from the techni- cal data is regarded as inappropriate and is thus prohibited. 3.6.1 The planetary gear units from the AG2300 series are not suitable for use in the following areas: • ATEX zones without suitable housing •...

  • Page 21: Definitions

    (whether at rest or in motion). Running noise Q [dB/A] The gear ratio and speed affect the running noise. In general, the following rule applies: • Higher speed = higher running noise • Higher gear ratio = lower running noise Version: 2.0 AG2300 ───...
  • Page 22 The EMERGENCY STOP torque is the maximum permissible torque at the gear unit output. It may be reached 1000 times at the most during the service life of the gear unit and must never be exceeded. ─── AG2300 Version: 2.0...

  • Page 23: Data For Operation And Environment

    Beckhoff products are designed for operation under certain environ- mental conditions, which vary according to the product. The follow- ing specifications must be observed for operation and environment in order to achieve the optimum service life of the products.

  • Page 24: Sp060 Mf

    In relation to the shaft center at the out- Maximum breakdown torque M [Nm] 2Max Temperature [°C] Maximum housing temperature + 90 Ambient temperature -15 to +40 Housing Properties Anodized; heat-treated steel Color Anthracite gray; RAL 7016 Seal Sealed bearing discs ─── AG2300 Version: 2.0...
  • Page 25 In relation to the shaft center at the output Maximum breakdown torque M 2Max [Nm] Temperature [°C] Maximum housing temperature + 90 Ambient temperature -15 to +40 Housing Properties Anodized; heat-treated steel Color Anthracite gray; RAL 7016 Seal Sealed bearing discs Version: 2.0 AG2300 ───...
  • Page 26 67 x [motor-dependent] min. 137.6 min. 142 min. 154 y [minimum and maximum permissible max. 33 max. 38 max. 45 shaft length] min. 14 min. 17 min. 23 z [motor-dependent] min. 23.6 min. 28 min. 33 ─── AG2300 Version: 2.0...
  • Page 27 [check motor shaft] w [motor-dependent] min. 108 min. 116 x [motor-dependent] min. 156 min. 164 y [minimum and maximum permissible max. 32 max. 38 shaft length] min. 14 min. 17 z [motor-dependent] min. 23 min. 18 Version: 2.0 AG2300 ───...

  • Page 28: Sp075 Mf

    In relation to the shaft center at the out- Maximum breakdown torque M [Nm] 2Max Temperature [°C] Maximum housing temperature + 90 Ambient temperature -15 to +40 Housing Properties Anodized; heat-treated steel Color Anthracite gray; RAL 7016 Seal Sealed bearing discs ─── AG2300 Version: 2.0...
  • Page 29 In relation to the shaft center at the output Maximum breakdown torque M 2Max [Nm] Temperature [°C] Maximum housing temperature + 90 Ambient temperature -15 to +40 Housing Properties Anodized; heat-treated steel Color Anthracite gray; RAL 7016 Seal Sealed bearing discs Version: 2.0 AG2300 ───...

  • Page 30: Sp075 Mc

    In relation to the shaft center at the out- Maximum breakdown torque M [Nm] 2Max Temperature [°C] Maximum housing temperature + 90 Ambient temperature -15 to +40 Housing Properties Anodized; heat-treated steel Color Anthracite gray; RAL 7016 Seal Sealed bearing discs ─── AG2300 Version: 2.0...
  • Page 31 In relation to the shaft center at the output Maximum breakdown torque M 2Max [Nm] Temperature [°C] Maximum housing temperature + 90 Ambient temperature -15 to +40 Housing Properties Anodized; heat-treated steel Color Anthracite gray; RAL 7016 Seal Sealed bearing discs Version: 2.0 AG2300 ───...
  • Page 32 129.5 x [motor-dependent] min. 163.8 min. 167.5 min. 185.5 y [minimum and maximum permissible max. 42 max. 45 max. 58 shaft length] min. 18 min. 18 min. 23 z [motor-dependent] min. 29.3 min. 33 min. 40 ─── AG2300 Version: 2.0...
  • Page 33 136 x [motor-dependent] min. 175 min. 179.4 min. 192 y [minimum and maximum permissible max. 33 max. 38 max. 45 shaft length] min. 14 min. 17 min. 23 z [motor-dependent] min. 23.6 min. 28 min. 33 Version: 2.0 AG2300 ───...

  • Page 34: Sp100 Mf

    In relation to the shaft center at the out- Maximum breakdown torque M [Nm] 2Max Temperature [°C] Maximum housing temperature + 90 Ambient temperature -15 to +40 Housing Properties Anodized; heat-treated steel Color Anthracite gray; RAL 7016 Seal Sealed bearing discs ─── AG2300 Version: 2.0...
  • Page 35 In relation to the shaft center at the output Maximum breakdown torque M 2Max [Nm] Temperature [°C] Maximum housing temperature + 90 Ambient temperature -15 to +40 Housing Properties Anodized; heat-treated steel Color Anthracite gray; RAL 7016 Seal Sealed bearing discs Version: 2.0 AG2300 ───...

  • Page 36: Sp100 Mc

    In relation to the shaft center at the out- Maximum breakdown torque M [Nm] 2Max Temperature [°C] Maximum housing temperature + 90 Ambient temperature -15 to +40 Housing Properties Anodized; heat-treated steel Color Anthracite gray; RAL 7016 Seal Sealed bearing discs ─── AG2300 Version: 2.0...
  • Page 37 In relation to the shaft center at the output Maximum breakdown torque M 2Max [Nm] Temperature [°C] Maximum housing temperature + 90 Ambient temperature -15 to +40 Housing Properties Anodized; heat-treated steel Color Anthracite gray; RAL 7016 Seal Sealed bearing discs Version: 2.0 AG2300 ───...
  • Page 38 156 x [motor-dependent] min. 210 min. 217 min. 244 y [minimum and maximum permissible max. 50 max. 58 max. 80 shaft length] min. 23 min. 23 min. 35 z [motor-dependent] min. 33 min. 40 min. 50 ─── AG2300 Version: 2.0...
  • Page 39 164 x [motor-dependent] min. 230 min. 234 min. 252 y [minimum and maximum permissible max. 42 max. 45 max. 58 shaft length] min. 18 min. 23 min. 23 z [motor-dependent] min. 29.3 min. 33 min. 40 Version: 2.0 AG2300 ───...

  • Page 40: Sp140 Mf

    In relation to the shaft center at the out- Maximum breakdown torque M [Nm] 2Max Temperature [°C] Maximum housing temperature + 90 Ambient temperature -15 to +40 Housing Properties Anodized; heat-treated steel Color Anthracite gray; RAL 7016 Seal Sealed bearing discs ─── AG2300 Version: 2.0...
  • Page 41 In relation to the shaft center at the output Maximum breakdown torque M 2Max [Nm] Temperature [°C] Maximum housing temperature + 90 Ambient temperature -15 to +40 Housing Properties Anodized; heat-treated steel Color Anthracite gray; RAL 7016 Seal Sealed bearing discs Version: 2.0 AG2300 ───...

  • Page 42: Sp140 Mc

    In relation to the shaft center at the out- Maximum breakdown torque M [Nm] 2Max Temperature [°C] Maximum housing temperature + 90 Ambient temperature -15 to +40 Housing Properties Anodized; heat-treated steel Color Anthracite gray; RAL 7016 Seal Sealed bearing discs ─── AG2300 Version: 2.0...
  • Page 43 In relation to the shaft center at the output Maximum breakdown torque M 2Max [Nm] Temperature [°C] Maximum housing temperature + 90 Ambient temperature -15 to +40 Housing Properties Anodized; heat-treated steel Color Anthracite gray; RAL 7016 Seal Sealed bearing discs Version: 2.0 AG2300 ───...
  • Page 44 193 x [motor-dependent] min. 274.3 min. 283.3 min. 305 y [minimum and maximum permissible max. 72 max. 80 max. 82 shaft length] min. 28 min. 35 min. 36 z [motor-dependent] min. 41 min. 50 min. 57 ─── AG2300 Version: 2.0...
  • Page 45 220 x [motor-dependent] min. 298.3 min. 305.3 min. 332 y [minimum and maximum permissible max. 50 max. 58 max. 80 shaft length] min. 23 min. 23 min. 35 z [motor-dependent] min. 33 min. 40 min. 50 Version: 2.0 AG2300 ───...

  • Page 46: Sp180 Mf

    In relation to the shaft center at the out- Maximum breakdown torque M [Nm] 1600 2Max Temperature [°C] Maximum housing temperature + 90 Ambient temperature -15 to +40 Housing Properties Anodized; heat-treated steel Color Anthracite gray; RAL 7016 Seal Sealed bearing discs ─── AG2300 Version: 2.0...
  • Page 47 In relation to the shaft center at the output Maximum breakdown torque M 1600 2Max [Nm] Temperature [°C] Maximum housing temperature + 90 Ambient temperature -15 to +40 Housing Properties Anodized; heat-treated steel Color Anthracite gray; RAL 7016 Seal Sealed bearing discs Version: 2.0 AG2300 ───...

  • Page 48: Sp180 Mc

    In relation to the shaft center at the out- Maximum breakdown torque M [Nm] 1600 2Max Temperature [°C] Maximum housing temperature + 90 Ambient temperature -15 to +40 Housing Properties Anodized; heat-treated steel Color Anthracite gray; RAL 7016 Seal Sealed bearing discs ─── AG2300 Version: 2.0...
  • Page 49 In relation to the shaft center at the output Maximum breakdown torque M 1600 2Max [Nm] Temperature [°C] Maximum housing temperature + 90 Ambient temperature -15 to +40 Housing Properties Anodized; heat-treated steel Color Anthracite gray; RAL 7016 Seal Sealed bearing discs Version: 2.0 AG2300 ───...
  • Page 50 [motor-dependent] min. 198 min. 209 x [motor-dependent] min. 310 min. 321 y [minimum and maximum permissible max. 78 max. 82 max. 82 shaft length] min. 35 min. 36 min. 40 z [motor-dependent] min. 46 min. 57 ─── AG2300 Version: 2.0...
  • Page 51 264 x [motor-dependent] min. 346 min. 355 min. 376 y [minimum and maximum permissible max. 72 max. 80 max. 82 shaft length] min. 28 min. 35 min. 36 z [motor-dependent] min. 41 min. 50 min. 57 Version: 2.0 AG2300 ───...

  • Page 52: Sp210 Mf

    In relation to the shaft center at the out- Maximum breakdown torque M [Nm] 3100 2Max Temperature [°C] Maximum housing temperature + 90 Ambient temperature -15 to +40 Housing Properties Anodized; heat-treated steel Color Anthracite gray; RAL 7016 Seal Sealed bearing discs ─── AG2300 Version: 2.0...
  • Page 53 In relation to the shaft center at the output Maximum breakdown torque M 3100 2Max [Nm] Temperature [°C] Maximum housing temperature + 90 Ambient temperature -15 to +40 Housing Properties Anodized; heat-treated steel Color Anthracite gray; RAL 7016 Seal Sealed bearing discs Version: 2.0 AG2300 ───...

  • Page 54: Sp210 Mc

    In relation to the shaft center at the out- Maximum breakdown torque M [Nm] 3100 2Max Temperature [°C] Maximum housing temperature + 90 Ambient temperature -15 to +40 Housing Properties Anodized; heat-treated steel Color Anthracite gray; RAL 7016 Seal Sealed bearing discs ─── AG2300 Version: 2.0...
  • Page 55 In relation to the shaft center at the output Maximum breakdown torque M 3100 2Max [Nm] Temperature [°C] Maximum housing temperature + 90 Ambient temperature -15 to +40 Housing Properties Anodized; heat-treated steel Color Anthracite gray; RAL 7016 Seal Sealed bearing discs Version: 2.0 AG2300 ───...
  • Page 56 Clamping hub internal diameter [mm] N; up to 55 t [motor-dependent] min. 190 u [check motor shaft] w [motor-dependent] min. 242 x [motor-dependent] min. 385 y [minimum and maximum permissible max. 95 shaft length] min. 45 z [motor-dependent] min. 59 ─── AG2300 Version: 2.0...
  • Page 57 Clamping hub internal diameter [mm] M; up to 48 t [motor-dependent] min. 210 u [check motor shaft] w [motor-dependent] min. 272 x [motor-dependent] min. 415 y [minimum and maximum permissible max. 82 shaft length] min. 45 z [motor-dependent] min. 57 Version: 2.0 AG2300 ───...

  • Page 58: Sp240 Mf

    In relation to the shaft center at the out- Maximum breakdown torque M [Nm] 5000 2Max Temperature [°C] Maximum housing temperature + 90 Ambient temperature -15 to +40 Housing Properties Anodized; heat-treated steel Color Anthracite gray; RAL 7016 Seal Sealed bearing discs ─── AG2300 Version: 2.0...
  • Page 59 In relation to the shaft center at the output Maximum breakdown torque M 5000 2Max [Nm] Temperature [°C] Maximum housing temperature + 90 Ambient temperature -15 to +40 Housing Properties Anodized; heat-treated steel Color Anthracite gray; RAL 7016 Seal Sealed bearing discs Version: 2.0 AG2300 ───...

  • Page 60: Sp240 Mc

    In relation to the shaft center at the out- Maximum breakdown torque M [Nm] 5000 2Max Temperature [°C] Maximum housing temperature + 90 Ambient temperature -15 to +40 Housing Properties Anodized; heat-treated steel Color Anthracite gray; RAL 7016 Seal Sealed bearing discs ─── AG2300 Version: 2.0...
  • Page 61 In relation to the shaft center at the output Maximum breakdown torque M 5000 2Max [Nm] Temperature [°C] Maximum housing temperature + 90 Ambient temperature -15 to +40 Housing Properties Anodized; heat-treated steel Color Anthracite gray; RAL 7016 Seal Sealed bearing discs Version: 2.0 AG2300 ───...
  • Page 62 Clamping hub internal diameter [mm] O; up to 60 t [motor-dependent] min. 240 u [check motor shaft] w [motor-dependent] min. 273 x [motor-dependent] min. 443 y [minimum and maximum permissible max. 110 shaft length] min. 55 z [motor-dependent] min. 62 ─── AG2300 Version: 2.0...
  • Page 63 Clamping hub internal diameter [mm] M; up to 48 t [motor-dependent] min. 210 u [check motor shaft] w [motor-dependent] min. 297 x [motor-dependent] min. 467 y [minimum and maximum permissible max. 82 shaft length] min. 45 z [motor-dependent] min. 57 Version: 2.0 AG2300 ───...

  • Page 64: Scope Of Supply

    Check the shipment for the following contents: • Gear units from the AG2300 series with packaging • Instruction leaflet Screws for fastening the gear unit to the motor or the machine are not included in the scope of delivery .

  • Page 65: Transport And Storage

    Falling down and hard knocks will damage the gear unit. Legal regulations for the lifting of loads When transporting individual gear units or motor/gear unit combina- tions without a hoist, adhere to the legal requirements for the lifting of loads by employees. Version: 2.0 AG2300 ───...
  • Page 66 Gear unit with motor Transport a motor/gear unit combination as follows: 6.2.2 • using suitable transport slings on the gear unit and on the motor with averaged center of gravity, with sufficiently dimensioned hoists ─── AG2300 Version: 2.0...

  • Page 67: Long-Term Storage

    You have the possibility to store the gear unit in a horizontal position and a dry environment over a short or long period. For storage we always recommend the original packaging. Adhere to the conditions specified in the chapter: "Transport and storage", [Page 65]. Version: 2.0 AG2300 ───...

  • Page 68: Technical Description

    Ingress and leakage of liquids may damage the motor. The standard installation position of the gear units is the motor at- tachment "M". You can use the gear units in any other installation position. ─── AG2300 Version: 2.0...

  • Page 69: Mechanical Installation

    The setting values are rounded to conventional scalings or adjust- ment possibilities: Screw size Quality of the screws 10.9 12.9 Tightening torque in Nm 1.15 1.68 1.97 2.64 3.88 4.55 13.2 15.4 21.5 37.5 42.5 62.5 73.5 73.5 1040 Version: 2.0 AG2300 ───...

  • Page 70: Motor On Gear Unit

    If a motor is included in the scope of delivery: Motors included in the scope of delivery are pre-mounted. For optimum performance, we recommend installation on Beckhoff AM8x00 synchronous servomotors. Requirements for the attachment of a motor to the gear unit: •...
  • Page 71 The value for the tightening torque [1] of the clamping screw is punched into the clamping hub from above. Information on the screw sizes and tightening torques can be found in the table below: Clamping hub diameter Identifying letter Width across flats [mm] Tightening torque [Nm] [mm] Version: 2.0 AG2300 ───...
  • Page 72 ► Remove feather key [+] and insert half wedge ► Remove the screw plug [1] from the adapter plate [2] ► Rotate the clamping hub [1] until the screw [2] is visible via the mounting hole ► Loosen the screw [2] by one turn ─── AG2300 Version: 2.0...
  • Page 73 Use screws of strength class 8.8. ► Tighten screw [3] with 100% of the screw yield limit. Refer to the chapter "Clamping hub", [Page 70]. ► Insert the screw plug back into the adapter plate Version: 2.0 AG2300 ───...

  • Page 74: Gear Unit To Machine

    Mechanical installation Gear unit to machine No washers necessary Beckhoff recommends not using washers if the material of the screw contact surface has an adequate interface pressure. Output side Avoid damage due to stresses 8.3.1 Use suitable tools for the assembly. Mount gear wheels and toothed belt pulleys without force on the output shaft and avoid mounting by driving or hammering on.
  • Page 75 In the following you will find supplementary information regarding the attachment of the gear unit to a machine: Quality of the screws = strength class 12.9 Gear Pitch circle diam- Thread Tightening torque unit eter [mm] [Nm] 15.4 37.5 73.5 Version: 2.0 AG2300 ───...

  • Page 76: Commissioning

    In case of motors with holding brake [+] • Check the function of the holding brake [+] • In case of malfunction: Apply 24 VDC, the brake must release • Check emergency stop functions ─── AG2300 Version: 2.0...

  • Page 77: During Commissioning

    Place the machine or plant in a safe state Make sure that the rotor comes to a complete stop. When the holding brake [+] is released, the rotor moves without remanent torque. Rotating components can lead to serious in- juries. Version: 2.0 AG2300 ───...

  • Page 78: Maintenance And Cleaning

    We will provide you with an overview of cleaning substances. Use the cleaning agents with a maximum concentration of 3 %. A higher concentration will damage the gear units. You will also receive infor- mation about non-approved cleaning agents. ─── AG2300 Version: 2.0...
  • Page 79 NaOH Sodium peroxide Sulfuric acid Tartaric acid COOH; CHOH COOH Tin-II IV-chloride SnCl O SnCl Not approved Cleaning agents Chemical formula 10.1.2 Aniline hydrochloride Bromine Sodium hypochlorite; bleaching NaCIO solution Mercury (II) chloride HgCl Hydrochloric acid Version: 2.0 AG2300 ───...

  • Page 80: Intervals

    Lubrication Notes on lubrication 10.2.1 Beckhoff gear units from the AG2300 series are lubricated for life. The lubricant used does not have to be renewed. If you wish to change the lubricant, contact Beckhoff Service. All gear units are lubricated for life with a lithium soap grease on a mineral oil basis or with a food-safe synthetic lubricating grease con- sisting of hydrocarbon oil and aluminum complex soap.

  • Page 81: Fault Correction

    Ensure sufficient cooling Replace the motor Ambient temperature too high Ensure sufficient cooling Increased operating noises Distorted motor mounting Contact Beckhoff Service Damage to the bearings Damage to the toothing Toothed belt tension too high Lubricant loss Lubricant quantity too high...

  • Page 82: Decommissioning

    Leaking oil can cause slips and falls, resulting in serious or fatal injury. Hot oil can cause severe burns. Impermissible removal of gear unit components Only Beckhoff Automation GmbH & Co. KG is permitted to disman- tle the gear unit. Contact Beckhoff Service for further information.

  • Page 83: Disposal

    The trans- 12.2.1 port costs are borne by the sender. Send the used devices with the note "For disposal" to: Beckhoff Automation GmbH & Co. KG "Service" Building Stahlstrasse 31 D-33415 Verl In addition, you have the option to contact a local certified specialist company for the disposal of used electrical and electronic appli- ances.

  • Page 84: Guidelines And Standards

    EU conformity Provision 13.1 Beckhoff Automation GmbH & Co KG will be pleased to provide you with EU declarations of conformity and manufacturer's declara- tions for all products on request. Send your request to: info@beckhoff.com RoHS All homogeneous materials used in the gear unit fall below the pre- scribed limit values of Directive 2011/65/EU Annex II.

  • Page 85: Index

    Transport  65 Instruction  10 Intended use  20 Lubrication  80 Maintenance  78 Intervals  80 Motor Mounting  70 Name plate  16 Operating Conditions  23 Ordering options Feather key  19 Output elements Mounting  74 Pictograms  10 Power derating  21 Version: 2.0 AG2300 ───...
  • Page 87 More Information: www.beckhoff.de/ag2300 Beckhoff Automation GmbH & Co. KG Hülshorstweg 20 33415 Verl Germany Phone: +49 5246 9630 info@beckhoff.com www.beckhoff.com...

Table of Contents