2-stage
Position
Explanation
Z, A, B
Clamping hub diameter up to 11 mm
C
Clamping hub diameter up to 14 mm
1)
Check motor shaft adaptation
2)
Smallest or largest permissible motor shaft length
3)
Dimensions are dependent on the motor
4)
Smaller motor shaft diameters are adaptable using a spacer sleeve with a minimum wall thick-
ness of 1 mm
Version: 2.2
• All figures in millimeters
• Dimensions without tolerance ± 1 mm
• Center bore according to DIN 332-DR M4x8
• Feather key according to DIN 6885-A 4x4x14
AG3210
Technical data
───
27