For Your Safety; General Safety Instructions - Beckhoff AG3210 Operating Instructions Manual

General safety instruc-
2.1
tions
Before operation
2.1.1
Version: 2.2
Read this chapter containing general safety information. The chap-
ters in these operating instructions also contain warning notices. Al-
ways observe the safety instructions for your own safety, the safety
of other persons and the safety of the product.
When working with control and automation products, many dangers
can result from careless or incorrect use. Work particularly thor-
oughly, not under time pressure and responsibly towards other peo-
ple.
This chapter provides you with instructions on safety when handling
the gear units. They cannot run independently. The gear units are
therefore regarded as incomplete machines. They must be installed
in a machine or plant by the machine manufacturer. The documen-
tation created by the machine manufacturer must be read.
Keep the surroundings clean
Keep your workplace and the surrounding area clean. Ensure safe
working.
Secure the control cabinet
When working on machines, secure the control cabinet against be-
ing switched on again.
Do not use defective gear units
Adhere to the specifications from the technical data for storage,
transport and operation. Do not use defective gear units.
Remove feather key
Remove the existing feather key if the planetary gear unit is oper-
ated without attachments on the input or output side.
Observe tightening torques
Mount and repeatedly check connections and components, comply-
ing with the prescribed tightening torques.
Earth electrical components or modules correctly
Touch electrical components or assemblies only when wearing ESD
protective clothing. Move only on a conductive floor.
Only use original packaging for further processing
When shipping, transporting, storing and packing, use the original
packaging or conductive materials.
AG3210

For your safety

─── 13