Table of Contents
Advertisement
Intended use
3.7
Improper use
3.7.1
Version: 2.0
The planetary gear units and right-angle gear units from the AG2250
series may be operated only for the intended activities defined in
this documentation, taking into account the prescribed environmen-
tal conditions.
The components are installed in electrical plants or machines.
Stand-alone operation of the components is not permitted.
The thermal protection contact incorporated in the motor windings
must be analyzed and monitored on a regular basis.
The gear unit is intended for attachment to motors under the follow-
ing conditions:
• The design of the motors is B5
• The concentricity tolerance or axial run-out tolerance conforms
to EN 50347
• The cylindrical shaft end has the tolerance class h6 to k6
Read the entire drive system documentation:
• This translation of the original instructions
• Original operating instructions for the motors
• Complete machine documentation provided by the machine
manufacturer
Any type of use that exceeds the permissible values from the techni-
cal data is regarded as inappropriate and is thus prohibited.
The planetary gear units and right-angle gear units from the AG2250
series are not suitable for use in the following areas:
• ATEX zones without suitable housing
• Areas with aggressive environments, for example aggressive
gases or chemicals
AG2250
Product overview
───
21
Advertisement
Table of Contents
