Manually Water All Active Zones (Test Program) - Rain Bird ESP-SMT Installation & Operation Manual

Manually Water All Active Zones
(Test Program)
Water all Zones with the same manual
run time per zone.
G The MANUAL WATERING screen will
appear and Water Selected Zones
will be blinking. Press the UP or
DOWN arrow button(s) until Water
All Zones is blinking; then press the
SELECT button.
The MANUALLY WATER ALL ZONES
H
screen will appear and the value for
Water All Zone for XX Minutes Each
will begin to blink.
Press the - or + button(s) to set the
I
desired amount of manual irrigation
run time for all Zones; then press the
START button.
The Minutes Remaining for Zone 1
J
will count down to 0 and then Zone
2 will be displayed with the Minutes
Remaining displayed.
If you desire to stop the manual
K
watering for the current zone and
want to advance to the next zone.
Press the ADV. ZONE button and
the next valve will begin to manually
operate.
ESP-SMT Smart Modular Control System
51
If you want to cancel all manual watering,
press the CANCEL button on the screen
OR turn the dial to the OFF position.
!
NOTE: The MANUALLY WATER
ALL ZONES feature is a time saving
tool to perform a quick system
"walk-thru" or to perform "system
winterization" without having to
walk back to the controller to set
each zone's manual run time one
zone at a time.
MANUAL WATERING
Water Selected Zones
- OR -
G
Water All Zones
MANUALLY WATER
ALL ZONES
H
Water All Zones
For 1
CANCEL
I
J
SELECT
K
Minutes Each
START
WATERING-MANUAL
1
Watering Zone
Minutes Remaining 2
ADV.
CANCEL ZONE
WATERING-MANUAL
2
Watering Zone
Minutes Remaining 2
ADV.
CANCEL ZONE