1 40
12V WATER PUMP
Once activated, the water pump will self-prime and provide water. The water pump contin-
ues to run until approximately 45 lbs. of pressure is achieved and shut off. The water pump
will automatically restart when pressure drops. Some cycling may occur, depending on the
volume of water being released. The water pump has a built-in check valve to prevent water
from back flowing.
Water pump filter is a screen filter located on the inlet side. This reusable screen must be
cleaned periodically.
1 4 0
Plu M b ing sY sTe M s
Figure 38. Spyder Control Unit
Water Pump Filter Screen
Figure 39. Water Pump
VA N L E I G H B E A c o N