Non-moving side moved manually.
•
Try to push the non-moving side in and out. If a motor shaft has broken then it will be
possible to move that side of the room several inches by hand. Larger rooms may require
several people to push.
IN-WALL slide system maintenance
•
Check all four (4) gear racks installed on the exterior sidewalls of the slide room for de-
bris (if found, remove debris immediately).
•
Clean with mild soap and water. No lubricant is necessary.
•
Operate the slides once or twice per month to keep the slides lubricated.
s li d eo u T sYsTe Ms
VA N L E I G H B E A c o N
2 1 3
2 1 3