Schwintek In-Wall Slideout System Manual Override - Tiffin Motorhomes VANLEIGH BEACON Owner's Manual

NOTE:
If your slideout system:
• Stalls out before reaching end of stroke, or
• Does NOT close and seal tightly.
Contact your dealer or Vanleigh RV Customer Service for trouble shooting and/
or repair.
Maintenance
Although the system is designed to be almost maintenance free, actuate the room once or
twice a month to keep the seals and internal moving parts lubricated. Check for any visible
signs or external damage before and after movement of the RV.
• For the best performance, the slideout system requires the auxiliary battery be fully
charged.
• Check for corrosion, and loose or damaged terminals/ connections at the battery, the
control switch, and the electronic actuator motor.
• Check that the motor leads under the RV chassis are in good condition. These connec-
tions are subject to damage from road debris.
• When operating the slideout system in harsh environments (i.e., road salt, ice buildup,
etc.) keep all moving parts clean, washing them as needed, with mild soap and water.
NOTE: The vanity slide and the bedroom slides are electric. The galley slide is
hydraulic.
• Grease or lubrication is NOT necessary. It could even harm the long-term dependability
of the slideout system.
Service and adjustments
Any slideout room adjustments must be performed by a certified RV service technician.
Adjustments made by non-certified persons may void any and all warranty claims.
ScHWINTEK IN - WALL SLIDEoUT SYSTEM MANUAL oVERRIDE
If the electric IN-WALL slideout does not extend or retract, follow these steps to override
the system (it will be easier if you have one or more persons to assist you):
s li d eo u T sYsTe Ms
VA N L E I G H B E A c o N
20 9
2 0 9