Standard Mode And Menu; Basic Jack Operation - Tiffin Motorhomes VANLEIGH BEACON Owner's Manual

Operation - MyRV OneControl Touch Panel
Operation - MyRV One Control Touch Panel

Standard Mode and Menu

To reach Standard Mode (Fig. 2) for leveling:
STANDARD MoDE AND MENU
1.
Power on the OneControl Touch Panel (Fig. 2K).
2.
Press "MyRV Control Panel" on the main screen.
3. Press the "Leveler" icon.

BASIc JAcK oPERATIoN

4.
The screen will show the system menu (Fig. 2) for Standard Mode. The front jacks can be extended/
retracted in Standard Mode. Rear jacks can be retracted from this mode.
Basic Jack Operation
While in Standard Mode:
1. Press "RETRACT" (Fig. 2I) or "EXTEND" (Fig. 2J), then "FRONT" to retract or extend front jacks.
2. Press "RETRACT" and "REAR" to retract rear jacks.
3.
Press the "AUTO LEVEL" (Fig. 2L) button to start the auto leveling sequence.
4.
Press the "AUTO HITCH" (Fig. 2M) button to start the hitch recognition sequence when reconnecting to
the tow vehicle.
5.
Use the "UP" or "DOWN" arrow (Fig. 2B) buttons to cycle through the menu screen options:
A. Info: Scroll to "INFO" (Fig. 2C) and press "ENTER" (Fig. 2H) button to display system information,
e.g., angle, jack stroke or software version.
B. Auto Retract: Scroll to "AUTO RETRACT" (Fig. 2F) and press "ENTER" button to start the "Auto
Retract" sequence, which will retract all jacks.
C. Manual Mode: Scroll to "MANUAL MODE" (Fig. 2G) and press "ENTER" button to start Manual
Level operation. Jacks operate in pairs. Use "RETRACT" or "EXTEND" to operate front jacks, right
rear and left rear jacks.
NOTE: Upon entering Manual Mode, a tutorial on operating the jacks will appear on the screen. Press "OK"
to clear the tutorial. To delete the tutorial, click the "Don't show this again" box in the bottom right
of the screen.
I.
II. Press "EXTEND" or "RETRACT," then "REAR" to operate rear jacks (right rear, right mid, left rear
III. Press "EXTEND" or "RETRACT," then "RIGHT" to operate right jacks (right mid and right rear).
IV. Press "EXTEND" or "RETRACT," then "LEFT" to operate left jacks (left mid and left rear).
1539
Rev: 03.25.19
Press "RETRACT" (Fig. 3A) or "EXTEND" (Fig. 3B), then "FRONT" (Fig. 3) to operate front jacks.
and left mid).
Fig. 3
A
VA N L E I G H B E A c o N VA N L E I G H B E A c o N
Page 7
B
97 97
9 7 9 7
CCD-0001539