10 4
10 4
coNFIGURING LINc REMoTE To SYNc To MYRV oNEcoNTRoL ToUcH PANEL
Configuring Linc Remote to Sync to MyRV One Control Touch Panel
1.
Turn on the Linc remote control (Fig. 13I) and enter a PIN.
2.
Choose "Leveler" from the menu screen.
3.
Turn on the MyRV OneControl Touch Panel (Fig. 2K).
4.
On the MyRV OneControl Touch Panel, press the "CONNECTED" icon at the top of the screen (Fig. 14A)
quickly 6 times. Wait a few seconds until the gear icon with "OPTIONS" appears (Fig. 15A).
5.
Press the gear icon with "OPTIONS" (Fig. 15A).
6.
Use the "UP" and "DOWN" arrows (Fig. 15B) to scroll to "WIRELESS CONFIG" (Fig. 16).
7.
Press "ENTER" (Fig. 16A). The screen will display "Wireless Configuration Press any Linc button to Sync"
(Fig. 17).
8.
Press any button in "Leveler" mode on the Linc remote control (Fig 13).
9.
Pressing "ABORT" on the MyRV OneControl Touch Panel (Fig. 17A) will cancel configuration sequence.
1 0 4
1 0 4
Rev: 03.25.19
A
D
E
Fig. 14
A
VA N L E I G H B E A c o N
VA N L E I G H B E A c o N
Fig. 13
C
B
F
G
H
I
B
Page 14
Fig. 15
A
CCD-0001539