Spyder Control System - Tiffin Motorhomes VANLEIGH BEACON Owner's Manual

13 4
as grease may act as an insulator and keep the battery electrical power from entering the
cables.
Removing the battery
If the battery is not going to be used for an extended period of time, it should be removed
from the RV and stored in a cool, dry place (40-60° F). A removed battery would require
periodic recharging to maintain its charge.
check battery water level
Following your battery manufacturer's recommendations, periodically check the fluid levels
in all the cells of the batteries (be sure to use safety eyewear during this process) and fill
those that are low with water (distilled or de-ionized water is preferred; tap water, okay).
Don't overfill the cells; follow the filling directions exactly. This battery checkup should be
done on a regular basis and will ensure optimum performance.

SPYDER coNTRoL SYSTEM

The Sypder controls are found on the interior, wall-mounted Command Center.
The Spyder control touchscreen is the "brain" of the 12V electrical system within your RV.
This system and its extensions control a majority of the electrical processes within your
unit. The home screen displays the battery voltage, as well as lighting controls.
Vanleigh RV does not recommend you attempt to fix an electrical circuit yourself. The infor-
mation provided by the Spyder can be used to assist an authorized service technician in the
event of a problem. If there is a problem with your 12V electrical system, contact Vanleigh
RV customer service or your authorized service technician.
1 3 4
e leC T riC a l sY sTe M s
WARNING
cC
lead - aCid baTTeries ConTain diluTed sulfuriC aCid
WHiCH Can be dangerous; aVoid direCT ConTaCT
WiTH anY baTTerY fluids. Wear eYe ProTeCTion.
VA N L E I G H B E A c o N