Figure 23. 50-Amp Power Cord; Figure 24. Load Center - Tiffin Motorhomes VANLEIGH BEACON Owner's Manual

1 20
connecting the power cord
1. Turn OFF the load center main 120-volt circuit breaker.
2. Carefully extend the entire length of the power cord from the electric cable hatch to
the external power source.
3. Plug the power cord into the receptacle. Make sure that all of the power cord prongs
are properly seated into the receptacle.
4. Return to your RV and turn ON the load center main circuit breaker.
Main Circuit Breaker
1 2 0
e leC T riC a l sY sTe M s

Figure 23. 50-Amp Power Cord

Figure 24. Load Center

VA N L E I G H B E A c o N