Standard Mode And Menu; Basic Jack Operation - Tiffin Motorhomes VANLEIGH BEACON Owner's Manual

102 102

Standard Mode and Menu

Standard Mode is the mode launched when the OneControl app "Leveler" function is powered up. The
screen will show the system menu (Fig. 10). The front jacks can be extended/retracted in Standard Mode.
STANDARD MoDE AND MENU
Rear jacks can be retracted from this mode.

Basic Jack Operation

BASIc JAcK oPERATIoN
While in Standard Mode:
1.
Press "RETRACT" (Fig. 10H) or "EXTEND" (Fig. 10I) and "FRONT" (Fig. 10) to extend or retract front jacks.
2. Press "RETRACT" and "REAR" (Fig. 10) to retract rear jacks.
3.
Press the "AUTO LEVEL" (Fig. 10J) button to start the leveling sequence.
4.
Press the "AUTO HITCH" (Fig. 10K) button to start the hitch recognition sequence when reconnecting
to tow vehicle.
5. Use the "UP" or "DOWN" arrow buttons (Fig. 10G) to cycle through the menu options:
A. Info: Scroll to "INFO" (Fig. 10C) and press "ENTER" button to display system information, e.g.,
angle, jack stroke or software version.
B. Auto Retract: Scroll to "AUTO RETRACT" (Fig. 10D) and press "ENTER" button to start the Auto
Retract sequence.
C. Manual Mode: Scroll to "MANUAL MODE" (Fig. 10E) and press "ENTER" button to start Manual
Level operation. Jacks operate in pairs. Use "RETRACT" or "EXTEND" to operate front jacks and rear
jacks.
I.
Press "RETRACT" (Fig. 12A) or "EXTEND" (Fig. 12B), then FRONT (Fig. 12C) to operate front
jacks.
II. Press "RETRACT or "EXTEND," then "REAR" (Fig. 12D) to operate rear jacks (right rear, right
mid, left rear and left mid).
III. Press "RETRACT" or "EXTEND," then "RIGHT" (Fig. 12E) to operate right jacks (right mid and
right rear).
IV. Press "RETRACT" or "EXTEND," then "LEFT" (FIG. 12F) to operate left jacks (left mid and
left rear).
F
1 0 2 1 0 2
Rev: 03.25.19
Fig. 12 - Manual Mode
C
E
A
D
VA N L E I G H B E A c o N VA N L E I G H B E A c o N
Page 12
B
CCD-0001539