Bath, Sink And Shower Accessories; Water Pump - Tiffin Motorhomes Allegro Bus 2016 Owner's Manual

BATH SINK, SHOWER & ACCESSORIES
Figure 12-3:
Bathroom sink

WATER PUMP

The water pump is self-priming and totally automatic,
operating on demand whenever water is required. The
water pump is used to pressurize the freshwater sys-
tem when the unit is not connected to city water. The
switches (Figure 12-5) are located in various, conve-
niently located areas throughout the motorhome where
water is accessible.
To start the pump, follow these instructions:
1. Fill or partially fill the fresh water supply tank.
2. Open the kitchen and bathroom faucets.
3. Turn the water pump switch "on" and allow the
water to fill the water line and the hot water heater.
4. Close each faucet after it delivers a steady stream
of water (close the cold-water faucet first). Leave
the hot-water faucets "on" until they also deliver a steady stream of water. This procedure will
assure that the water heater is filled with water.
5. The water pump should stop running once all faucets are closed.
PLUMBING & BATH FEATURES
The shower and sink in the
bathroom are a solid, contin-
uous surface. When cleaning
this surface, use care to prevent
scratching or marring it.
75
Figure 12-4:
Shower
Figure 12-5:
Water pump switch