Controls; Headlamp Control; Daytime Running Lamps; High Beam Control - Tiffin Motorhomes Wayfarer TM 2021 Series Owner's Manual

Table of Contents

Advertisement

CONTROLS

HEADLAMP CONTROL

The headlamp control is located on the dash, left of the steering column. Pull it towards
you to the first position to turn on the parking lamps, tail lamps, license plate lamps and
marker lamps.
Pull the headlamp control toward you to the outer position to turn on the head;lamps in
addition to the previous lamps.
REMEMBER: TURN HEADLAMPS OFF WHEN YOU TURN THE ENGINE
OFF.

DAYTIME RUNNING LAMPS

This motorhome may be equipped with daytime running lamps. If so, it turns on the
headlamps with a reduced output provided the ignition switch is in the ON position and
the headlamp control is in the OFF or Parking Lamps position.
Always remember to turn on your headlamps at dusk or during inclement weather. The
Daytime Running Lamp System does not provide adequate lighting under these
conditions. Failure to activate your headlamps under these conditions may result in
a collision.

HIGH BEAM CONTROL

High beam control is located at the end of the turn signal lever on the left of the steering
column. Push the lever forward to activate and pull toward you to deactivate the high
beams.

PANEL DIMMER CONTROL

The instrument panel dimmer control is built into the headlamp switch on the dash.
Rotate the knob clockwise/counterclockwise when the headlamp control is in the parking
lamp or low beam position. To turn on the courtesy lamp(s), rotate the knob fully
counterclockwise.
2021 Wayfarer TM Series Owners Manual V1.0
20

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents