System Setup - Raymarine C-Series Reference Manual

2-6

System Setup

MENU ITEM
Position Mode
Controls whether the position is expressed in latitude and
longitude co-ordinates or Loran TDs.
TD Setup
Position Mode
If the
selected chain identifier, slave and ASF.
Simulator
ON - allows operation of display without data from antenna
and/or external data sources.
Demo - a series of slides with descriptions to demonstrate
the various system functions.
Bearing Mode
Mode of all bearing and heading data displayed. This does
not affect how the chart or radar are drawn.
MOB Data Type
Selects whether position data or dead reckoning displayed
on screen. Assuming your boat and the MOB are subject to
same tide and wind effects, dead reckoning normally gives a
more accurate course.
Variation Source
This allows you to compensate for the naturally occurring
offset of the earths magnetic field. When set to AUTO, the
system will calculate this difference automatically. To enter
your own variation value, set to MANUAL.
Manual variation
If Variation Source is set to MANUAL then use this setting to
enter the variation value. This value transmitted to any other
SeaTalk instruments.
Language
Selected language used for screen text, labels, menus,
options and display format for lat/long position informa-
tion.
Extended Character Set
Controls whether foreign characters are made available
when you are entering text.
Settings Reset
Sets all system setup options to their default values
is set to TD's, this function controls the
C-Series Display Reference Manual
OPTIONS
(Default in bold)
Lat/Long
TD's
Various
OFF
ON
Demo
True
Magnetic
Dead Reckoning
Position
Auto
Manual
0°E
Range 0 - 30º east/west
English (UK), English (US),
Français, Deutsch, Español,
Português, Italiano, Neder-
lands, Dansk, Svenska,
Norsk, Suomi, Íslenska
OFF
ON