How Do I Create A Route From A Track - Raymarine C-Series Reference Manual

4-20
A track starts to be laid from the stern of the boat using the minimum number of track
points necessary. If the maximum number of tracking points is reached, you will be
warned. The track will continue to be recorded with the earlier tracking points being
overwritten.
If the power fails whilst a track is being recorded or the position fix is lost, a
Note:
break will occur in the track. In this case only the last segment can be converted into a
route.
To stop tracking...
TRACKS...
To stop laying a track, press STOP TRACK.
You are asked what you want to do with your track:
• To save this track, press SAVE. The Save Track box is displayed to enable you to
change the track's name or color. See
or track?
• To delete this track from the system, press DISCARD TRACK. A warning message is
displayed.
• To resume tracking, press CANCEL STOP COMMAND.

How do I create a route from a track?

Creating a route from a track enables you to retrace a saved track.
When a track is converted the system creates the closest route through the recorded
track, using the minimum number of waypoints. Each waypoint created will be saved
with the depth and temperature data (if applicable) for that position.
On completion, the maximum deviation of the route from the recorded track is
displayed and the new route is added to the route list. It can now be displayed, edited
and erased etc. in the same way as other routes in the system.
If a track break occurs, only the last segment is converted to a route.
Note:
... from the current track?
You can create a route from the track that you are currently laying. This method will
take a snapshot of the track to date, convert it to a route and then continue laying the
track:
TRACKS...
1. Press CREATE ROUTE FROM TRACK. The track list is displayed.
STOP TRACK
page 26
on .
CREATE ROUTE
FROM TRACK...
C-Series Display Reference Manual
How do I change the name or color of a route
CREATE ROUTE
FROM TRACK