Raymarine C-Series Reference Manual page 73

Chapter 4: Using the Chart
4nm
Sunday Trip#
PORT POINT
SHOW/HIDE
ROUTES...
4. Continue entering new waypoints until your route is complete.
5. You now have the following options:
i. To save and immediately follow the built route:
Press FOLLOW (QUICK) ROUTE. The route is saved under the name 'Quick
Route' . If a Quick Route already exists it is overwritten. The system then ini-
tiates a follow route.
ii. To save the built route for later use (and rename it if required):
Press SAVE ROUTE or OK. The Save Route dialog box is displayed. You can
edit the route name or color or press OK to accept the defaults..
If you want to keep the Quick Route, you will need to rename it (s
Note:
change the name or color of a route or track? on page 26
... using existing waypoints
You can use waypoints that already exist, to build a new route.
A
ROUTES
1. Move the cursor over the appropriate waypoint.
2. Press USE THIS WAYPOINT to include this waypoint in the current route.
• If you make an error when you are building your route and wish to remove the
last waypoint, press UNDO WAYPOINT. The dotted line joining it to the route is
deleted (but not the waypoint itself). The cursor moves back to the previous
waypoint.To remove successive waypoints, press this key repeatedly.
North-Up (Relative Motion)
Port point
PORTSIDE
FOLLOW ROUTE
OPTIONS...
BUILD NEW
ROUTE
RTE
Portside
Sunday Trip#
CREEK VIEW
CREEK POINT
BUILD NEW
ROUTE
).
USE THIS
WAYPOINT
4-11
Local
Sunday Trip#
GULLY RIDGE
REVIEW AND EDIT
ROUTES...
How do I
ee