How Do I Erase Information From A Card; How Do I Send And Receive Information Using Nmea - Raymarine C-Series Reference Manual

2-22
3. Press the ARCHIVE & TRANSFER.
4. Press the RETRIEVE FROM CARD.
5. From SELECT LIST, choose WPT (Waypoint), RTE (Route), or TRK (Track).
6. The card contents for your selection appears on the screen.
7. Use the trackpad (up/down) to select what you want to retrieve.
8. Press RETRIEVE ALL or RETRIEVE GROUP/ROUTE/TRACK as appropriate. A
message box appears to show that the information is being written to the display.
9. When the transfer is complete a message will appear on the screen.
Note: Pressing the
play.
If whilst retrieving information a selection is already found to exist on the display, a
warning message will appear:
The soft keys will change to give you the options of:
• RETRIEVE AS NEW
• REPLACE
• CANCEL RETRIEVE
Select which option you want by pressing the corresponding soft key.

How do I erase information from a card?

If you wish to remove information from a card, for example you no longer need it, or
the card is full, it can be erased by using the DELETE or DELETE ALL soft keys that can
be found on the Retrieve soft key bar. A message will be displayed on screen asking you
to confirm that you want to delete the item(s), before it takes place.

2.11 How do I send and receive information using NMEA?

You can transfer and retrieve waypoints or routes to and from another instrument or
PC by:
To transfer or receive information using NMEA:
1. Press the DATA button.
2. Press the ARCHIVE AND TRANSFER.
3. Press the TRANSFER ON NMEA. The following soft keys are displayed
SEND WPTS ON
NMEA
4. Press SEND WPTS ON NMEA, SEND RTES ON NMEA or RECEIVE ON NMEA.The
transfer starts. If you wish to stop the transfer at any point, press STOP TRANSFER.
5. When the transfer is complete, STOP TRANSFER greys out and the soft keys
reappear.
soft key, will retrieve all of a Database list to the dis-
RETRIEVE ALL
SEND RTES ON
RECEIVE ON NMEA
NMEA
C-Series Display Reference Manual