Raymarine C-Series Reference Manual page 138

7-6
To display the A-Scope image:
1. Press A-SCOPE and toggle the A-SCOPE to ON. The active window is split
vertically, with the A-Scope image on the right hand side (including the bottom
coverage value) and the standard fishfinder image on the left.
2. Toggle to the required A-SCOPE MODE (see illustration above).
3. Press OK or CANCEL to return to the default display.
If the Bottom Lock or Zoom image was displayed, selecting A-Scope automati-
Note:
cally switches OFF Bottom Lock and Zoom.
C-Series Display Reference Manual