How Do I See A Live Image - Raymarine C-Series Reference Manual

Chapter 7: Using the Fishfinder
water conditions. You can however adjust these settings manually if you prefer. For
more details, please refer to

How do I see a live image?

A-SCOPE
OFF
The standard fishfinder display shows a historical record of fishfinder echoes. If
required, you can display a live image of the bottom structure and the fish directly
below the transducer by using the A-Scope feature. The width of the bottom covered
by the A-Scope is indicated at the bottom of the window. A-Scope provides a more
precise and easier to interpret indication of the target strength.
There are three A-Scope modes which are selected for individual fishfinder windows:
I
MODE 1
The A-scope image is
centred in the window.
page 27
A-SCOPE MODE
ON 1 2 3
MODE 2
The left-hand side of the
Mode 1 image is expanded
to give a more detailed view.
.
7-5
MODE 1
The A-scope image angles
outward as signal width
increases with depth
D6674-2