Raymarine C-Series Reference Manual page 38

2-14
What do the status icons tell me?
The status icons on the data bar confirm whether the appropriate connections to your
C-Series has been made:
Status icon
How do I change the data bar?
You can change the position of the data bar, and the information it contains by using
the MENU button. Data is added to the bar from the top (side data bar) or left (top
data bar). As you add more data existing data moves down. If you remove data, any
data below it moves up.
1. Press the MENU button.
2. Select the Databar Setup menu.
3. Select the required on-screen position (Top or Side) of the data bar using the
Position option.
4. Select the required size (Large or Normal) using the Top Databar Size option.
5. To change the content of the data bar, select the Configure option. You may now
ADD DATA, REMOVE DATA and MOVE DATA, as follows:
To add data
1. Press ADD DATA. The Data Groups menu is displayed, this provides a list of sub
menus for different categories of data.
2. Select the required Data Group sub-menu, then select the data item to add to the
data bar.
Description
The boat and fish icon indicates the current status of your fish-
finder:
Icon animated - connection to a DSM has been successful.
Icon static - the DSM is connected but not transmitting.
Icon greyed-out - no DSM is connected.
The satellite icon indicates the current status of your GPS:
FIX - your unit is successfully connected to a GPS receiver.
NO FIX - your unit has been unable to connect to a suitable GPS
receiver.
The scanner icon indicates the current status of scanner:
Icon rotates - the scanner is transmitting (TRANSMIT/TX
mode).
Icon static - the scanner is powered on but is not currently
transmitting ( STANDBY mode).
Icon greyed out - this indicates that the scanner is currently
powered off (OFF mode).
Icon rotates and is then static -
C-Series Display Reference Manual