How Do I Mark A Position - Raymarine C-Series Reference Manual

7-16

7.5 How do I mark a position?

Marking a position enables you to return to that spot at a later date. A position is
marked on the screen with a waypoint. When a waypoint is placed, its details are
added to the Waypoint List and a vertical line labelled WPT (see illustration below) is
displayed on screen.
For full details on editing and managing waypoints, please refer to Chapter 3:
Note:
Working with Waypoints.
200 kHz: Auto
TRANSDUCER
SETTINGS...
A waypoint can be placed:
... at your current position
1. Press WPTS twice (or press WPTS and then WAYPOINT AT VESSEL). The Edit
Waypoint box is displayed.
2. Press OK (or wait for 3 seconds) to save the waypoint with the standard settings.
... at the cursor
1. To pause the scrolling image so that it is easier to position the cursor over the
required site, press PRESENTATION and then toggle the SCROLL otption to PAUSE.
2. Press WAYPOINT AT CURSOR. The Edit Waypoint box is displayed.
3. Press OK (or wait for 3 seconds) to save the waypoint with the standard settings.
... at a specified position
1. Press WPTS.
Gain: Auto High
ZOOM... BOTTOM LOCK...
C-Series Display Reference Manual
WPT
WPT
WPT
WPT
WPT
A-SCOPE... PRESENTATION...