How Do I Change The Name Or Color Of A Route Or Track - Raymarine C-Series Reference Manual

4-26
... by moving a waypoint
1. Move the cursor over the waypoint that is to be repositioned within the route.
2. Press MOVE WAYPOINT.
The route legs connected to the selected waypoint are now represented by a
dashed line.
3. Drag the cursor to the new position.
4. Press OK.
The waypoint is fixed at the new location and the route legs connected to it revert
to a solid line.
A waypoint's new position will be reflected in all other routes that make use of
Note:
it.
... by removing a waypoint
1. Move the cursor over the waypoint that is to be removed.
2. Press REMOVE WAYPOINT.
Provided that this waypoint was created as part of that route, and it has not been
used in another route, the system deletes it from the system. If the waypoint is used
in another route, the system will warn you that it cannot be removed.

How do I change the name or color of a route or track?

ROUTES...
TRACKS...
You can change the name for a more meaningful one and/or change the color if
required. This will make them easier to distinguish from one another, particularly if you
have numerous routes or tracks in your system.
To change the route or track name/color proceed as follows:
1. Select the appropriate route or track on screen or via the route or track list.
2. Press EDIT NAME & COLOR.
The edit route or track screen is displayed:
REVIEW AND EDIT
ROUTES...
REVIEW AND EDIT
TRACKS...
C-Series Display Reference Manual
EDIT NAME AND
COLOR...
EDIT NAME AND
COLOR...