How Do I Reverse A Route; How Do I Change The Course Of A Route - Raymarine C-Series Reference Manual

Chapter 4: Using the Chart

How do I reverse a route?

You can reverse the course of a route as follows:
1. Select the appropriate route on screen.
2. Press REVERSE ROUTE. The route name moves to new starting point and the way-
points within the route renumber accordingly .
For details of how to reverse and immediately follow a route, see page 23.
Note:

How do I change the course of a route?

ROUTES...
You can amend the course of a route by:
• Adding a waypoint to the beginning or end of the route or between two existing
waypoints.
• Moving a waypoint within a route.
• Removing a waypoint
You can affect these changes either via the Make Route dialog box or by selecting the
route on screen and then using the appropriate soft keys (not applicable when adding
a waypoint at the beginning of a route).
You will not be able to edit the waypoint that you are currently navigating to
Note:
(target waypoint).
Adding a waypoint
... at the beginning of your route
This option changes the course of a route by adding an existing waypoint to the start of
the route:
1. Select the appropriate route for editing via the REVIEW AND EDIT ROUTES soft key
or select the route on screen and then press REVIEW AND EDIT THIS ROUTE.
2. Press AMEND ROUTE COURSE.
3. Press USE WAYPOINT LIST.
The Make Route screen is displayed.
REVERSE ROUTE
REVIEW AND EDIT
ROUTES...
AMEND ROUTE
COURSE...
4-23