Raymarine C-Series Reference Manual page 34

2-10
Radar Alarms Setup
These alarms will only sound when you are in the radar applicaiton.
MENU ITEM
Guard Zone Sensitivity
Ensure that this is not set too low or targets will be missed.
Fishfinder Alarms Setup
These alarms will only sound when you are in the fishfinder application
MENU ITEM
Fish Alarm
Switches the fish alarm on or off.
Fish Alarm Sensitivity
Fish Alarm
If the
fish return strength reaches the sensitivity that you specify.
Fish Alarm Depth Limits
Fish Alarm
If the
gered (2 beeps) if any target meets the sensitivity level and
is within the
specify.
Shallow Fish Limit
Specifies the lower value for the
Deep Fish Limit
Specifies the upper value for the
Shallow Depth Alarm
Switches the shallow depth alarm on or off.
If a DSM is not connected, this cannot be set.
Shallow Depth Alarm Value
Shallow Depth Alarm
If the
gered if the depth drops below the value you specify.
is set to ON, an alarm is triggered when the
and this alarm is set to ON, an alarm is trig-
Shallow Fish Limit Deep Fish Limit
and
Fish Alarm Depth LImit
Fish Alarm Depth LImit
is set to ON, an alarm is trig-
C-Series Display Reference Manual
OPTIONS
(Default in bold)
50%
0 - 100%
OPTION
(Default in bold)
OFF
ON
0
10% - 100%
OFF
ON
that you
> 1 fathom
. > 1m
> 2ft
> 1 fathom
> 1m
> 2ft
OFF
ON
> 1 fathom
> 1m
2ft
Up to maximum range of
transducer