How Do I Clean The Display; When Do I Reset A Display; What Happens If I Reset The System - Raymarine C-Series Reference Manual

8-2

How do I clean the display?

CAUTION: Cleaning the display
Take care when cleaning the display, to avoid damaging it.
(1) Do NOT wipe the display screen with a dry cloth, as this could scratch
the screen coating.
(2) Do NOT use acid, ammonia based or abrasive products.
Regularly clean your Display as follows:
1. Switch off the power to the Display.
2. Wipe the Display with a clean soft cloth. To remove oily finger marks use a spray
cleaning agent of the type used for cleaning eyeglasses.
A suitable micro-fibre cloth is supplied with your display and spray can be purchased
from your local optician.

8.3 When do I reset a Display?

You can reset the C-Series Display in one of three ways:
• Factory reset.
• Power-on reset.
• Picture reset.

What happens if I reset the system?

When you reset the system, at power-on the last used values are retained for all the
options, except for those listed in the following table which are reset to the factory
default each time:
Item
Heading mode
Rain
Fast Time Constant (FTC)
Alarm
Zoom
Windows
Brightness
C-Series Displays Installation Manual
Power-on setting
Head-up
OFF (but value stored) - radar only
OFF (but value stored) - radar only
ON with last-used value
OFF
OFF
ON at 100%