Vessel Position On The Chart Display - Raymarine a65 Operation Instructions Manual

Using the Race Timer
A count down Race Timer is available in the Chart
application. Once the Race Timer reaches zero it will
change color and start to count up, after 10 seconds
the Race Timer will automatically be hidden from the
screen but continue to count up.
From the Chart application's Navigate menu:
1. Select Race Timer.
2. Select Show Race Timer in Chart.
3. Select Countdown From:.
4. Set the timer to the required value.
The Race Timer can be set from 1 minute to 30
minutes.
5. Select Back to return to the Race Timer menu.
6. Select Start to start the Race Timer countdown.
• You can synchronize the Race Timer count
down by selecting Skip to Next Minute.
• You can stop and reset the Race Timer by
selecting Stop & Reset.
7. With the Race Timer count down stopped, you
can hide the timer by selecting Hide Race Timer
8. With the Race Timer hidden you can display it
again by selecting Show Race Timer in Chart
from the menu.
Using the Race Timer — Touchscreen
controls
The Race Timer can be controlled by interacting with
the onscreen Race Timer.
From the Chart application, with the Race Timer
displayed:
1. Touch the Race Timer to start the countdown.
2. With the timer running you can select the Race
Timer to synchronize.
3. Touch and hold the Race Timer to stop and reset
the countdown.
Chart application
14.8 Vessel position on the chart
display
Your current position is represented on-screen by
the vessel symbol.
The vessel symbols are only displayed when
heading or COG data is available.
The vessel symbol varies depending on selected
settings and the availability of heading data.
Motor
Vessel
Sail Vessel The sail vessel symbol
Small
Vessel
Black dot
Vessel position data can also be shown in the
databar.
Locating your vessel
The vessel icon can be repositioned to the center of
the screen by following the steps below.
1. Select the Find Ship icon:
left hand side of the screen.
Locating your vessel
The vessel icon can be repositioned to the center of
the screen by following the steps below.
1. Select Menu.
2. Select Find Ship.
The motor vessel symbol
is used when the vessel
type selected during the
initial set up wizard is a
motor vessel.
is used when the vessel
type selected during the
initial set up wizard is a
sail vessel.
The small vessel symbol is
used when the Boat Size
setting is set to Small.
A black dot is displayed
when heading and COG
data is not available.
located on the
173