Info Button; Time Setting; Initial Start-Up - Siemens SN Series Instruction Manual

Info button {

T he Info button { can be used to
I n f o b u t t o n
display additional programme
information.
Press the Info button { 8.
1.
Press the programme button.
2.
Information on the selected
programme is indicated on the
display window at the top @.
To leave, press Info button { 8.
3.

Time setting

W hen the appliance is switched on the
T i m e s e t t i n g
for the first time, the time starts at 12:00
o'clock.
Set the time as follows:
Open the door.
1.
Switch on ON/OFF switch (.
2.

Initial start-up

When the dishwasher is switched on for
the first time, you are taken directly to
the settings for the initial start-up.
Note: If you select Home Connect
during the initial start-up, make further
settings via your dishwasher App.
Observe the supplied Home Connect
documents.
On the display window at the top @
the following text appears for manual
selection:
Initial start-up settings
Language
Initial start-up
Time format
* depending on the features of your dishwasher
Factory setting
Deutsch
Manual/Home Connect
24 h
Getting to know your appliance en
Press Info button { 8 for 3
3.
seconds until the following text is
indicated on the display window at
the top @:
Scroll with < >
Set with - +
Leave with Setup 3 sec.
Keep pressing button > )R until the
4.
time setting is indicated on the
display window at the top @.
Make the setting with setting buttons
5.
+ - `. If the selection buttons + -
` are held down, the set values
are changed in 10-minute steps.
Press and hold the Info button {
6.
8 for 3 seconds.
The chosen setting has now been
stored.
Note: If the appliance was
disconnected from the power supply for
a prolonged period, the time starts at
12:00 o'clock. Set the time.
Scroll with < >
Set with - +
Leave with Setup 3 sec.
The required settings for the initial
start-up are listed in the table below.
To change the setting:
Keep pressing button > )R until the
1.
required setting is displayed.
Change the setting with setting
buttons + - `.
Press and hold the Info button {
2.
8 for 3 seconds.
The chosen setting has now been
stored.
Infotext
by pressing Info button {
Language selection.
Manual/Home Connect.
12h or 24h.
11