en Fault, what to do?
Fault
Fault code ":‹ˆ is lit.
Fault code ":‚ƒ is lit.
Fault code ":‚... is lit.
Fault code ":‚† is lit.
Fault code ":‚‡ is lit.
Fault code ":ƒƒ is lit. *
Fault code ":ƒ... is lit.
Fault code ":Ġ is lit.
Fault code ":ƒˆ is lit.
A different fault code is
indicated on the digital
display.
(":‹‚ to ":„‹)
Home network is not
loading.
WLAN display flashes.
Home Connect cannot be
implemented correctly.
* depending on the configuration of your specific dishwasher
40
Reason
Intake opening (on right inside of
appliance) covered by utensils.
Heating element calcified or
soiled.
Water protection system
activated.
Constant water supply.
Filters 1j are soiled or
blocked.
Waste-water hose kinked or
blocked.
Siphon connection still sealed.
Cover on the waste water pump
loose.
Waste water pump blocked or
cover on the waste water pump is
not locked in position.
Mains voltage too low.
A technical fault has probably
occurred.
WLAN is not active on the router. Check the wireless network connection of
Connection to the home network
is not available.
Possible setting errors or a
technical fault.
Remedial action
Arrange utensils so that the intake
opening is not obstructed.
Clean appliance with dishwasher cleaning
agent or descaler. ~ "Cleaning and
maintenance" on page 35
Operate the dishwasher with water
softening system and check the setting.
~ " Water softening system/special salt"
on page 18
Turn off water supply.
Call customer service and quote the fault
code.
Clean filters. ~ "Filters" on page 37
Install hose without kinks, remove any
residue.
Check connection to siphon and open if
required.
Lock cover correctly. ~ "Waste water
pump" on page 38
Clean pump and lock cover correctly.
~ "Waste water pump" on page 38
No appliance fault, have the mains voltage
and electrical installation checked.
Switch off the appliance with the ON/OFF
switch (. After a short time restart the
appliance.
If the problem recurs, turn off water supply
and pull out the mains plug.
Call customer service and quote the fault
code.
your router.
Activate the wireless network on your
router.
Observe the supplied documents and
support information for Home Connect.