Adding Detergent; Combination Detergent - Siemens SN Series Instruction Manual

:
Warning
Risk of injury and damage due to
non-observance of the safety
instructions for detergent and
rinse-aid products!
Always follow the safety instructions for
detergent products and rinse-aid
products.

Adding detergent

If the detergent dispenser 9: is still
1.
closed, actuate locking bar 9B to
open it.
Pour detergent into the dry detergent
2.
dispenser 9: only (insert tablet flat,
not on its edge).
Dosage: see manufacturer's
3.
instructions on the packaging. Use
graduated detergent dispenser.
Usually 20 ml–25 ml are adequate
for normal soiling. If using tablets,
one tablet is adequate.
Close cover on the detergent
4.
dispenser.
Cover "clicks" into position.
The detergent dispenser opens
automatically at the optimum time
depending on the programme. The
powder or liquid detergent is
distributed in the appliance and is
dissolved, the tablet falls into the
tablet collecting tray where it
dissolves in doses.
Tip: If the utensils are only lightly
soiled, slightly less than the indicated
amount of detergent is usually
adequate.
Suitable detergents and care products
can be purchased online via our
website or via customer service (see
back page).

Combination detergent

Apart from conventional detergents
(Solo), a number of products are
available with additional functions.
These products contain not only the
detergent but also rinse-aid and salt
replacement substances (3in1) and,
depending on the combination (4in1,
5in1, ...), additional components such
as glass protection or stainless steel
cleaner. According to the
manufacturers, combination detergents
function only up to a specific degree of
hardness (usually 21° dH, 37° fH,
26° Clark, 3.7 mmol/l). Over this limit
salt and rinse-aid must be added. For
optimum cleaning and drying results,
we recommend using salt and rinse-aid
detergent en
27