Home Connect; Setting Up The App; Setting Up Home Connect - Siemens SN Series Instruction Manual

en Home Connect
Basic setting
Greeting
Factory setting
* depending on the configuration of your specific dishwasher
--------
Notes
The "Network login" menu option is
■
not available unless Wi-Fi has been
switched on.
The "Connect to App" menu option
■
is not available unless there is a
connection to the home network.
The "Energy manager" * menu
■
option is not available unless there is
a connection to the home network
and the appliance is connected to
the app.
o

Home Connect

T he availability of the Home Connect
H o m e C o n n e c t
function depends on the availability of
Home Connect services in your country.
Home Connect services are not
available in every country. You can find
more information here at
www.home-connect.com.
This dishwasher is Wi-Fi capable and
can be remotely controlled via a mobile
device.
Note: Wi-Fi is a registered trade mark
of the Wi-Fi Alliance.
If your dishwasher does not connect to
the home network, you can also operate
the dishwasher manually by pressing
the buttons.
14
Factory setting
On
Reset
Infotext;
by pressing Info button {
When switching on the appliance, the
brand logo can be switched off.
Reset to factory setting.

Setting up the App

To be able to operate the appliance via
Home Connect, the Home Connect App
must be installed on your mobile
terminal device.
Observe the supplied Home Connect
documents.
Follow the steps specified by the App to
make the settings.

Setting up Home Connect

You can set your dishwasher by
pressing the remote start button })"
or proceed as follows:
Open the door.
1.
Switch on ON/OFF switch (.
2.
Press Info button { 8 for 3
3.
seconds until the following text is
indicated on the display window at
the top @:
Scroll with < >
Set with - +
Leave with Setup 3 sec.
Keep pressing button > )R until the
4.
required setting is indicated on the
display window at the top @.
Make the setting with setting buttons
5.
+ - `.
Press and hold the Info button {
6.
8 for 3 seconds.
The chosen setting has now been
stored.