Appliance Interior; Info Button; Time Setting - Siemens SN678D10TG Instruction Manual

en Getting to know your appliance

Appliance interior

See Fig. ~ Page 2
1" Interior light *
1* Cutlery drawer *
12 Top basket
1: Upper spray arm
1B Tablet collecting tray
1J Lower spray arm
1R Dispenser for special salt
1Z Filters
1b Cutlery basket *
1j Bottom basket
9" Dispenser for rinse aid
9* Detergent dispenser
92 Lock for detergent dispenser
9: Rating plate
* depending on the features of your
dishwasher

Info button {

The Info button { can be used to
I n f o b u t t o n
display additional programme
information.
Press the Info button { 8.
1.
Press the programme button.
2.
Information on the selected
programme is indicated on the
display window at the top @.
To leave, press Info button { 8.
3.
12

Time setting

When the appliance is switched on the
T i m e s e t t i n g
for the first time, the time starts at 12:00
o'clock.
Set the time as follows:
Open the door.
1.
Switch on ON/OFF switch (.
2.
Press Info button { 8 for 3
3.
seconds until the following text is
indicated on the display window at
the top @:
Scroll with < >
Set with - +
Leave with Setup 3 sec.
Keep pressing button > )* until the
4.
time setting is indicated on the
display window at the top @.
Make the setting with setting buttons
5.
+ - X. If the selection buttons + -
X are held down, the set values
are changed in 10-minute steps.
Press and hold the Info button {
6.
8 for 3 seconds.
The chosen setting has now been
stored.
If the appliance was
Note:
disconnected from the power supply for
a prolonged period, the time starts at
12:00 o'clock. Set the time.