Safety Instructions; Signal Terms And Definitions; General Instructions - Siemens NXPLUS C Installation And Operating Instructions Manual

Safety instructions

Symbols used
Important
6/293
Safety instructions
1

Signal terms and definitions

The signal words "danger," "warning" and "caution" used in this instruction manual indicate
the degree of hazard that may be encountered by the user.
Danger - Indicates an imminently hazardous situation.
If this hazardous situation is not avoided, death or serious injury will be the consequence.
➭ Observe the safety instructions.
Warning - Indicates a potentially hazardous situation.
If this hazardous situation is not avoided, death or serious injury can be the consequence.
➭ Observe the safety instructions.
Caution - Indicates a potentially hazardous situation.
If this hazardous situation is not avoided, minor or moderate injury can be the
consequence.
➭ Observe the safety instructions.
Note - Indicates a potentially hazardous situation.
If this hazardous situation is not avoided, damage to property or environment can be the
consequence.
➭ Observe the notes.
Information - Indicates an important information or facilitation of work.
➭ Observe the information.
➭ Operation symbol: Identifies an operation. Asks the operator to perform an operation.
✔ Result symbol: Identifies the result of an operation.
2

General instructions

• The personnel must read and understand this manual before starting to work.
• Observe all safety instructions and warnings in this manual, and follow the instructions.
• Store this manual carefully, and so that it is accessible to the personnel at any time.
• This manual is a part of the product. When the switchgear is transferred, supply this manual
as well.
The illustrations included in this manual are simplified and serve to create a general
understanding. The illustrations may therefore deviate from the actual product.
Revision 11 • INSTALLATION AND OPERATING INSTRUCTIONS • NXPLUS C • 802-9081.9
DANGER
WARNING
CAUTION
NOTICE
INFORMATION
INFORMATION