Siemens NXPLUS C Installation And Operating Instructions Manual page 251

1
Initial situation
4
➭ Switch the right-hand three-position
disconnector to CLOSED position (insert
the operating lever and turn 90°
clockwise).
7
➭ Push the left-hand control gate to the
right and hold it (the interrogation lever
locks in lower position. The left-hand
actuating opening for the READY-TO-
EARTH function opens).
10
➭ To earth the right-hand busbar system,
close the circuit-breaker.
802-9081.9 • INSTALLATION AND OPERATING INSTRUCTIONS • NXPLUS C • Revision 11
Bus sectionalizer panel with two three-position disconnectors: Earthing the right-
hand busbar system
2
➭ Push the interrogation lever downwards and
hold it.
5
➭ Remove the operating lever (the interrogation
lever and the control gate return to their initial
position).
8
➭ Switch the left-hand three-position
disconnector to READY-TO-EARTH position
(insert the operating lever and turn 90°
clockwise).
11
➭ Fit a padlock.
3
➭ Push the right-hand control gate to the left
and hold it (the interrogation lever locks in
lower position. The right-hand actuating
opening for the DISCONNECTING function
opens).
6
➭ Push the interrogation lever downwards
again and hold it.
9
➭ Remove the operating lever (the
interrogation lever and the control gate
return to their initial position).
Operation
251/293