Siemens NXPLUS C Installation And Operating Instructions Manual page 56
Medium-voltage switchgear, fixed-mounted circuit-breaker switchgear up to 24 kv, extendable, single busbar, metal-enclosed, gas-insulated
Hide thumbs
Also See for NXPLUS C:
- Installation and operating instructions manual (172 pages) ,
- Installation and operating instructions manual (266 pages)
Table of Contents
Advertisement
Description
Other accessories
56/293
• Adapter for emergency operation (to be used only with motor-operated slow motion
mechanisms)
• Double-bit key with a diameter of 3 mm (door of low-voltage compartment)
• Double-bit key with a diameter of 5 mm (voltage transformer disconnector and door of low-
voltage compartment)
• Torx screwdriver T25 to open the cable compartment cover
According to the order documents / purchase order (selection):
• Surge arresters
• Surge limiters
• Cable plugs / adapter systems
• Cable plugs
• HV HRC fuse-links
• Test fuses for mechanical simulation of the striker of HV HRC fuse-links in transformer
feeders, with extension tube (for slide lengths 292 mm or 442 mm)
• LRM voltage indicators
• Units to check the capacitive interface and the voltage indicators
• Unit to test the plug-in voltage indicators
• Phase comparison test units
• Holder for operating tools such as hand crank, double-bit key, operating lever
Revision 11 • INSTALLATION AND OPERATING INSTRUCTIONS • NXPLUS C • 802-9081.9
Advertisement
Table of Contents
