Due Application; Qualified Personnel - Siemens NXPLUS C Installation And Operating Instructions Manual

802-9081.9 • INSTALLATION AND OPERATING INSTRUCTIONS • NXPLUS C • Revision 11
4

Due application

Extendable fixed-mounted circuit-breaker switchgear NXPLUS C, single busbar, is used in
transformer and distribution substations as well as for switching duties in industrial plants.
The panels are designed for rated voltages up to 24 kV and rated currents up to 2500 A. In
distribution systems up to 24 kV (15 kV), a maximum short-circuit current of 25 kA (31.5 kA) is
permissible.
5

Qualified personnel

Qualified personnel in accordance with these instructions are persons who have been instructed
by the Switchgear Factory Frankfurt (participation in an assembly and installation training with
certificate), who are familiar with transport, installation, commissioning, maintenance and
operation of the product, and who have appropriate qualifications for their work.
• Training and instruction or authorization to switch on, switch off, earth and identify power
circuits and equipment / systems as per the relevant safety standards.
• Training regarding the applicable specifications for the prevention of accidents and the use
of appropriate safety equipment.
• Training in first aid and behavior in the event of possible accidents.
Safety instructions
9/293