6.
Product Compliance
6.1
RoHS and WEEE
The Power Debugger and all accessories are manufactured in accordance to both the RoHS Directive (2002/95/EC)
and the WEEE Directive (2002/96/EC).
6.2
CE and FCC
The Power Debugger unit has been tested in accordance to the essential requirements and other relevant provisions
of Directives:
•
Directive 2004/108/EC (class B)
•
FCC part 15 subpart B
•
2002/95/EC (RoHS, WEEE)
The following standards are used for evaluation:
•
EN 61000-6-1 (2007)
•
EN 61000-6-3 (2007) + A1(2011)
•
FCC CFR 47 Part 15 (2013)
The Technical Construction File is located at:
Microchip Technology Norway AS
Brøsetvegen 164
7069 Trondheim
Norway
Every effort has been made to minimize electromagnetic emissions from this product. However, under certain
conditions, the system (this product connected to a target application circuit) may emit individual electromagnetic
component frequencies which exceed the maximum values allowed by the above mentioned standards. The
frequency and magnitude of the emissions will be determined by several factors, including layout and routing of the
target application with which the product is used.
©
2020 Microchip Technology Inc.
User Guide
Power Debugger
Product Compliance
DS40002201A-page 84
Need help?
Do you have a question about the Power Debugger and is the answer not in the manual?