Table of Contents
Advertisement
Fitting the Cutting Unit Pro 18
!
WARNING!
Wear protective glasses when
assembling the cutting unit. The
springs that tension the belt can fly
off and cause personal injury.
1.
Place the Rider on a flat surface and
apply the parking brake. Check that the
lever for setting the cutting height is in
the lowest position.
Ensure the anti-scalp roller is fitted on
the cutting unit (1).
2.
Grasp the handle on the front of cutting
unit's frame (2) and push the unit in
under the Rider.
Make sure the tongue (3) on the unit
mates correctly.
3.
Fit the screw and secure with a locking
pin.
REPAIR INSTRUCTIONS
3
1
Cutting Unit
Tongue in the loop
Bolt in the front bracket
2
6017-159
8009-595
6017-120
87
English-
Advertisement
Table of Contents
