Husqvarna Rider Pro 18 AWD Workshop Manual page 69

5. Follow the hydrostatic transmission cable
backwards towards the hydrostatic
transmission and cut the plastic tie
around the cable.
6. Remove the spring lock and the
hydrostatic transmission cable's rear link
joint from the arm on the hydraulic pump.
7. Lift off the link joint and pull out the cable.
8. Lift out the hydrostatic transmission
cable and the accompanying link joint.
9. Unscrew both link joints from the
hydrostatic transmission cable.
REPAIR INSTRUCTIONS
Cut the plastic tie
Rear link joint
Lift off the link joint
Remove the link joints
8009-204
8009-685
6019-016
6019-017
67
English-