Pump Unit - Husqvarna Rider Pro 18 AWD Workshop Manual

Pump Unit

Remember cleanliness, follow the
instructions under "Hydraulic
system\Hydraulic Hygiene".
Counterhold using a spanner when releasing
and tightening the coupling nuts so that the
hoses or angled nipples are not exposed to
twisting strain.
The hydraulic pump can be replaced without
dismantling the pump unit, however, to gain
better access it is recommended that the
entire unit is removed. When dismantling and
assembling separate hydraulic pumps, follow
this instruction in applicable parts.
Removal
1. Remove the pump's drive belt from the
pump pulley, see "Replacing the
Hydraulic Pump's Drive Belt" on
page 76.
2. Release the external hydraulic hoses
from the hydraulic tank.
3. Release the hose from the rear axle.
52
English-
REPAIR INSTRUCTIONS
Connection the hydraulic tank
Connection rear axle
8009-705
8009-644