Driving - Husqvarna Rider Pro 18 AWD Workshop Manual

DESIGN AND FUNCTION

Driving

The Rider Pro and ProFlex are equipped with
a hydrostatic transmission that gives the
driver complete control over driving. The
speed is controlled using the forward or
reverse pedals.
The AWD machines are equipped with
constantly engaged all wheel drive, which
means a differential lock is not required.
The hydraulic pump and hydraulic tank with
suction unit are integrated into a single pump
unit. The pump includes control equipment for
8009-704
The transmission cover removed
the direction and flow of the oil. It is controlled
by the hydrostatic pedals via cables.
8009-708
Pump unit
Front axle on Rider AWD from the top. The
axle consists of a hydraulic motor, differential
and drive axles.
In order to move the machine without the
front axle's drive engaged, there is a
mechanical bypass valve that is operated by
a control on the inside of the left-hand wheel.
6020-626
Front axle
Rear axle on Rider ProFlex AWD from the
top. Designed in principle as the front axle
In order to move the machine without the rear
axle's drive engaged, there is a hydraulic
bypass valve that is operated by a control on
the inside of the left-hand wheel.
8009-659
Rear axle
30
English-