Table of Contents
Advertisement
Replacing the Front Belt Pro 18 AWD
Dismantling
The entire belt is removed according to the
following when a snow blade is to be attached
to the machine.
1.
Put the cutting unit in the service
position.
2.
Pull the centre belt off of the centre
pulley. The belt becomes slack when the
cutting unit is lifted.
3.
Take off the front belt from the centre
pulley and remove the belt.
Assembly
1.
Position the belt from the front. Pull the
belt on the outside of the runner pulley
and on the inside of the adjuster pulley.
REPAIR INSTRUCTIONS
Service position
Belt tightening
Runner and tension wheels
6017-227
8009-684
8009-596
81
English-
Advertisement
Table of Contents
