3.
Pull the belt on the inside of the runner
wheel on top of the front axle.
4.
Press the guide plate in by the anti-scalp
roller and move the belt into place.
5.
Press in the spring-loaded belt guide
under the blade brake, position the
centre belt and pull it onto the centre
pulley.
6.
Fit the cutting equipment.
Equipment Frame
Removal
1.
Remove the cutting unit, see "Removing
the Cutting Unit Pro 18:" on page 89.
2.
Set the equipment frame in its
uppermost position (past the stop
bracket).
84
English-
REPAIR INSTRUCTIONS
Tightening the belt
Guide plate
Equipment frame in uppermost position
8009-689
8009-343
8009-616