Initial Calibration; How To Access The Internal On-Screen Menus; Main Screen - Extron electronics TLP 1000MV User Manual

Initial
Configuration
and Calibration
This section describes:
•
•
•

How to Access the Internal On-screen Menus

When the TouchLink panel first has power applied, the unit boots up and displays the
opening screen. To access the on-screen menus, press the Menu button (see page 5 for
the
The menus open at the Main screen. There are five different screens (Main, Volume,
Time, Network, and Video) that can be selected by pressing the appropriate button at
the left side of the screen.
There is also an
applies and saves any changes and leaves the menu screens.

Main Screen

Figure 13.
Values can be changed by pressing the buttons to highlight them. Press the
buttons to adjust the values or press the Auto Backlight or Wake on Motion buttons to
toggle between
How to Access the Internal On-screen Menus
The Main, Volume, Time, Network, and
The Screen Touch Calibration Screen
TLP 1000MV or page 10 for the
button at the bottom left corner of the screen. Pressing this button
Exit
Main
Sleep timer: 300 Sec
Volume
Down
Time
Backlight: 073%
Network
Down
Video
Exit
Main Screen
and . The current setting is shown above the buttons.
Off On
TLP 1000MV and TLP 1000TV • Initial Configuration and Calibration
Video screens
TLP 1000TV).
Auto Backlight
Up On
Up
Wake on Motion
On
PoE
Active
Down or Up
14